Presenting the ILTEC Technology to a Japanese Delegation
On 7th of March 2019, a Japanese delegation of altogether 13 people visited the SMS group for gaining more in depth knowledge about latest technical achievements regarding refractory material and furnace integrity. Seizing this opportunity the visitors from different steel companies were brought in contact with the ILTEC Technology, for safe and water free cooling. Dr. Martina Hanel and Mr. Hannes Joubert from Mettop and PolyMet Solutions respectively where presenting the technology with all it´s benefits and we are loo king forward to more in depth discussion about ILTEC in Japanese steel plants for different applications.
Implementation of a parallel flow device in a pickling tank
In September 2018, a new and innovative approach to the use of the parallel flow device (PFD) was implemented at voestalpine BÖHLER Bleche GmbH & Co KG in Mürzzuschlag, Austria. Altogether, the installation comprises of three elements for improving the performance in the pickling tank and saving hydrofluoric acid.
For a better movement and thus optimised
kinetics of the pickling process, the acid circulates through a series of
nozzles via a parallel flow device at the top end of the tank. This provides a
perfectly guided flow to ensure a more homogeneous acid distribution.
In order to prevent the overheating of the acid, the steam injection is circumvented by the implementation of an instantaneous heating unit. This ensures a constant but adjustable temperature in the entire tank.
As another benefit resulting from the circulation of the acid, a filtering unit is installed at the intake socket of the pump. This filtering unit can be removed and the suspended solids collected in the filter can be removed periodically.
The given drawing shows the assembly of the unit.
With the overall aim to save time for pickling, safe hydrofluoric acid by temperature control and filtering unit and safe costs by stop using the steam generator, we are convinced to set new standards in pickling units together with voestalpine BÖHLER Bleche GmbH & Co KG.
Join our Seminar „Copper Extractive Metallurgy”
which takes place from 27th to 29th of November in Leoben, Austria.
This introduction to risk management in copper metallurgy allows to understand the fundamentals and principals of risk analysis for the copper production process. The seminar focuses on the process routes from the concentrate to the refined copper cathode. Participants will be able to understand the links between different technical parameters and their influence on the risk matrix. Key performance indicators and a cost/risk analysis for different process steps will be discussed regarding their risk influence.
Learn more and register at: http://mettop.com/en/products/15
IL-B2001 - Decrease of minimum operational temperature to -10 °C
Recent R&D development could now distinctly lower the crystallization temperature of IL-B2001 for ensuring a minimum operational temperature of -10 °C.
However, the real crystallization temperature is well below - 30 °C.
The new additives makes an operation in cold environment possible without additional heating elements and diminishes the need of insulation of piping and components.
Poly TBRC - Latest generation of copper refining and smelting process
For our customers in Germany and Russia the PolyTBRC is in latest stage of construction
The installation of this special TBRC converter, as a joint
project of PolyMet Solutions, SMS group, Urban Gold and Mettop, will allow our
customer to increase the recycling capacity of copper scrap whilst, at the same
time, improving process quality, efficiency, and safety.
The benefits for our customers when installing of a PolyTBRC can be highlighted:
Improved heat transfer and reaction kinetics in refining and smelting processes.
The oxygen/gas-combustion system produces an intense, stable and compact flame with very efficient heat transfer capabilities and low exhaust volume flow.
Lambda values can be adjusted over a wide range to produce reducing, neutral or oxidizing conditions.
High ration of metals recovery and flexible process performance with good slag-metal separation.
ILTEC cooled lance for injection purposes.
We are looking forward to hearing from you if there are any
questions or you need more information regarding our PolyTBRC.
ILTEC System ready for Installation
ILTEC facility for Spanish
customer is finally ready for shipping
The newly constructed ILTEC facility is equipped with four individual cooling lines which enables the cooling of large areas and applications. Furthermore the cooling capacity of the two heat exchangers of 1.500 kW each and the pumping capacity of 50 m3/h guarantee the appropriate removal of larger heat amounts.
The construction is designed as two individual installation racks (as seen in the construction drawing and the picture) for making both the transport and the installation on site more easy and flexible. As a special feature, the installation of a high-performance instantaneous heater makes the system not only capable of cooling but also enables heating and temperature keeping within the cooler.
Mettop GmbH 成立于 2005 年，是一家独立的奥地利工程公司，其专门从事冶金工艺领域技术的优化和开发。Mettop 涉足有色金属的火法冶金和湿法冶金领域，近年来还为钢铁行业开发创新冷却系统。
产品品种涵盖了设备可用性领域的优化解决方案，并将耐火材料选择和布局与气体冲洗系统及不同的冷却件搭配组合。在湿法冶金领域，开发出了一种新型电解技术（METTOP - BRX 技术），最高可将电解精炼生产率提高 50 ％。针对所有的冶金设备和冶金熔炼炉，Mettop 开发了创新的无水冷却技术 ILTEC，其将离子液体用作冷却介质，使整个冶金行业在安全高效的冷却方面有了一种新的方法。